How I fixed my garage door opener

Posted on August 29, 2015 By

A garage door opener is an important part of the door that can determine the efficiency of the garage door. In the modern technology, the opener enables the user to access the garage with just a press of the button. The opener saves the user from manually operating the garage, which is tiresome and risky. But garage door failures are common. It is important that you understand how to fix some common issues that affect the garage door openers. My remote control failed to operate my opener but could operate on other people’s doors. In some cases, the door would open itself without my control.

First, I checked to see if the cord of the opener is plugged to the power. It is clear that the opener cannot operate if it is not connected to the source of power. If the power is connected and there is no electricity, you would be required to seek the help from an electrician. My garage door opener was connected and there was electricity. I had to let the opener rest for about 20 minutes to cool.

My second step involved testing the beam of the sensor. I checked the alignment of the beam with the instructions of the manufacturer. I reset the sensor by moving them and retesting them again. In many cases, the sensor is blocked out of alignment by objects. In the same case, I checked for loose connections both in the opener and the remote. I changed the socket, which seemed won out and could easily cause faults to the opener. I then changed the remote battery. After doing all the above, the opener didn’t work.

I checked my remote control and it is at that moment that I realized that one of the buttons had jammed. I also had to change the frequency of my remote control to fit that of my garage door opener and not that of others. Since the garage door was operating in an unpredictable behavior, I increased the tension in the springs. I did this by adjusting the screws.

Garage door openers offers the most helpful service to the user. However, the users rarely gives a second thought to them until they fails to operate as expected. To avoid disappointments from the garage door openers, it is recommended that one undertakes regular maintenance of the garage door openers.

GarageRepair Tips


How I Broke My Garage Door

Posted on August 29, 2015 By

how I broke my garage doorGarage doors can be quite scary and at first glance the opening and closing mechanisms look complicated. The up-and-over style of garage door is expensive to replace so when it breaks – or when you think it is broken – the dollar signs start popping up.

I broke my garage door and it was simply an issue of temperature! The cold weather had stiffened the mechanism so when I tried to open it there was inadequate power to achieve movement. Luckily, modern doors manufactured in the last decade or so come with pressure adjustment that can be quickly loosened or tightened with a screwdriver.

Other seemingly disastrous scenarios with garage doors include having your car stuck inside with the door shut tight! Before you call a technician, and if you have access to the inside of the garage from the house, try looking for the emergency manual opener. This is simply a line that dangles from the opener track above your head, usually finished with a grab handle or a red gripper. It allows you to pull the door open and shut under your own steam.

If you are going to open the garage door manually just bear in mind that you need to go a little gently on the pull cord – if you yank it too hard it is likely the handle will come clean off and you could be left with two DIY jobs instead of one! At least this will enable you to get your car out until you have solved the problem of the jammed door.

If you find your poor old garage door has buckled or bowed you get tension rods from the hardware store that when fitted will slowly straighten out the curve or dent. Do this gradually though. Think of it as orthodontic treatment for doors – rather like when your dentist puts a brace on your teeth, you need to do it slowly and under gradual pressure.

While I was looking for other guys that broke their garage doors as well, I found this interesting video on youtube. Never give up and don’t get mad – there is always an easy way to fix it.

Garage


My Take on Home Repair and What I Wish I Knew When I Started

Posted on August 29, 2015 By

Home repair useful things to knowInstalling the drywall wouldn’t be such a hard task. After all, I had a good set of tools, the internet was full of information and handy tips, and I’ve always been a handy guy. Well, I would have loved to say my Do-it-Yourself (DIY) project was a success, but not quite since I ended up making some costly mistakes: So, what did I learn?

1. Never Mince On the Tools

Yes, I’ve always heard that “don’t be too cheap and stingy when it comes to repair tools” but why should I pay $ 10 for a hammer while I could get a cheap one for about $2. After all, the task was simply nailing in the tacks and nails. Well, it wasn’t long before my cheap hammer broke in-between the task and the head smashed through the window. Next thing I knew was a new and more expensive hammer plus window pane were needed.

2. Don’t Be the Superman

The garage door was quite bulky and heavy, but, why seek help from a friend or neighbor to assist. I mean, I could manage lifting and aligning the door, right? WRONG. Not only did the large and heavy wooden door crush on me but I ended up staring at the hospital ceiling due to a fractured leg. Lesson: always have a helper around.

3. Don’t Sacrifice Quality for Economy

One of the steps of making the attic more comfortable and functional was to install drywall on the sides and a floorboard. But, the drywall and the 3 /4 block board were a bit pricey. Being the “sharp” guy I opted for 1 /4 drywall and 3-plywood. The only problem was I could not only hear the people beneath but the mice and insects as well. Oooh- did I mention that my foot went through the flooring twice? Lesson – quality matters.

You probably are thinking about undertaking a home repair project. Maybe you want to install new garage doors, kitchen cabinets/cupboards, deck or other duties. For the best results and peace-of-mind don’t make the above mistakes.

Repair Tips


Garage Door Repair – My 4 Best Tips

Posted on August 29, 2015 By

garage door repair tips

In any house, the garage door is one of the biggest moveable parts hence it requires a lot of attention in order to keep it well-maintained and repaired in case of any faults. Garage door repair specialists recommend that it should be attended to once you notice any faults since it could be very dangerous to your family. Here are 4 best tips that can make your garage door repair project easy:

Install worn out weather seals

This is a repair you can easily handle without really considering calling an expert. When you install these weather seals you will have saved yourself the agony of using a lot of energy to open or close your garage door. Also, by installing weather seals you will prevent moisture from getting into the garage which would otherwise to rust development on metallic garage door parts.

Lubricate the noisy parts

It does not mean that you have to buy another garage door part to replace the noisy one; you just need to repair it by lubrication. Garage door specialists recommend that you use lithium spray when lubricating the squeaking garage door parts.

Realigning garage door sensors

Garage door sensors may not functioning properly due to being knocked off their required position or line. Therefore, to fix or repair this problem you just push them back to the right position where they face each other. So, to avoid the blinking light, you just got to re-position your garage door sensors and be sure to get a solid and consistent light.

Reset your garage door opener

You need to reset your garage door opener if the garage door opens automatically or stops working before meeting the bottom part of the door. Therefore, with that problem, you do not need to buy a new opener but just rest it by ensuring you follow these simple procedure; properly shut off the power by unplugging the opener, wait for ten seconds then turn the power on again.

GarageRepair Tips